北电资料 北电传输产品维护指南-DX.doc.docVIP

北电SDH设备用户维护指南 OPTera Connect DX 北电网络(中国)有限公司 目录 北电SDH设备用户维护指南 1 OPTera Connect DX 1 1.北电Optera Connect DX技术描述 4 1.1技术描述 5 1.1.1支持业务类型 5 1.1.2光接口类型 5 1.1.3端口容量 5 1.2网络配置 6 2.北电DX设备日常维护及操作指导 6 2.1概述 6 2.2日常维护任务的实施 7 2.2.1设备运行环境检查 7 2.2.2网元管理状态监控 7 2.2.3活跃告警监控 9 2.2.4网元历史告警检查 10 2.2.5网元重要性能监测点的传输性能检查 11 2.2.6日常故障处理 12 2.3日常维护中注意事项 12 3.北电DX设备预防性维护检查项目 13 3.1DX OPC预防性维护检查项目 13 3.1.1 Usernames and passwords are managed correctly 13 3.1.2 all of the NEs should be associated with OPC and Preside 14 3.1.3 OPC switch should be processed successfully. 14 3.1.4 Transfer primary OPCs data to backup OPC successfully. 15 3.1.5 Perform a successful Configuration Audit from the primary OPC 15 3.1.6 Perform a successful Connection Audit from the primary OPC 15 3.1.7 Check OPC Disk Space 16 3.1.8 Check there are no OPC Alarms Raised 16 3.1.9 Check for any abnormal entries in the OPC log. 16 3.1.10 Perform a primary OPC backup to flash cartridge(tape) 16 3.2 DX 网元预防性维护检查项目 17 3.2.1 NE Should be 100% clear of alarms 17 3.2.2 Check NE for any masked alarms and check they are documented 18 3.2.3 NE should pass protection execiser on all aggregates and Tribs. 18 3.2.4 NE should pass protection exerciser on all CPG level protection 19 3.2.5 Aggregate RX Power is -6dbm plus or minus 1.5 Volts 19 3.2.6 Aggregate RX IQ value is between 0.7 and 1.5 Volts 20 3.2.7 Check NE server address set 20 3.2.8 NE to OPC Association 20 3.2.9 Check that the SSM Status is as designed and is working correctly 21 3.2.10 Perform a Lamp Test and check successful 21 3.2.11 Check Fans are working correctly and test. 21 3.2.12 Check the Power and Grounding 21 4.北电设备告警解释及索引 21 4.1环境类告警： 22 4.2设备类告警 22 4.3常规设备类告警 23 4.4时钟设备类告警 24 4.5 OPC设备类告警 24 4.6 机架设备类告警 25 4.7交叉模块类设备告警 25 4.8常规Facility类告警 26 4.9外同步时钟接口类Facility告警 27 4.10性能监控Facility类告警 27 4.11共享保护环类Facility告警 28 5.常见告警清除步骤 29 5.1电路盘坏 (Circuit pack Fail) 29 5.2电路盘不匹配(Circuit pack Mismatch) 30 5.3电路盘丢失(Circuit pack Missing) 31 5.4性能监测15MIN 门限告警 32 5.5倒换失败(Prote