HEIDENHAIN五坐标编程CHAP11.docVIP

Heidenhain Conversational Programming Drilling cycles The TNC offers 7 cycles for all types of drilling operations. CycleSoftkey 1 - Pecking without automatic pre-positioning. 200 - Drilling with automatic pre-positioning and 2nd setup clearance. 201 - Reaming with automatic pre-positioning and 2nd setup clearance. 202 - Boring with automatic pre-positioning and 2nd setup clearance. 203 - Universal Drilling with automatic pre-positioning, 2nd setup clearance, chip breaking and decrement. 2 - Tapping with a floating tap holder. 17 - Rigid Tapping without a floating holder. 18 - Thread C