第八章节 CO2气体保护电弧焊.pptVIP

熔焊工艺及设备 第八章CO2气体保护电弧焊 南昌大学机电工程学院 School of Mechatronics Engineering 表8-6 CO2气体保护电弧焊常用焊丝的牌号、化学成分及用途 焊丝牌号 合 金 元 素 % 用途 C Si Mn Cr Mo Ti Al Ni V S P H10MnSi ≤0.14 0.60~0.90 0.80~1.10 ≤0.20 — — — ≤0.30 — ≤0.030 ≤0.040 焊接低碳钢和低合金钢 H08MnSi ≤0.10 0.70~1.0 1.0~1.3 ≤0.20 — — — ≤0.30 — ≤0.030 ≤0.010 H08MnSiA ≤0.10 0.60~0.85 1.4~1.7 ≤0.20 — — — ≤0.25 — ≤0.030 ≤0.035 H08Mn2SiA ≤0.11 0.65~0.95 1.80~2.10 ≤0.20 — — — ≤0.30 — ≤0.030 ≤0.030 H04MnSiAlTiA ≤0.04 0.40~0.80 1.40~1.80 — — 0.35~0.65 0.20~0.40 — — ≤0.025 ≤0.025 焊接高强度合金钢 H08Mn2MoA 0.06~0.11 ≤0.25 1.60~1.90 ≤0.20 0.50~0.70 — — — — ≤0.030 ≤0.030