基于51单片机液晶显示器控制电路设计.docxVIP

LCD显示控制系统设计LCD Display Control System目录摘要IAbstractII第一章概述1§1.1系统背景1§1.2 系统概述2第二章方案论证3§2.1字模数据的存储3§2.2 通信电路4第三章液晶显示模块简介5§3.1 显示控制器6§3.2 列驱动方式11§3.3 行驱动方式12第四章硬件设计13§4.1硬件电路设计要求13§4.2 总体电路设计构架13§4.3 单片机与液晶显示模块接口13§4.4 单片机与计算机的通信接口14§4.5 电源电路15第五章系统软件设计16§5.1 内置T6963C控制器软件特性16§5.2 初始化子程序设计20§5.3 串行通信子程序设计21§5.4 显示控制子程序设计21第六章系统调试23§6.1 分步调试23§6.2 系统统一调试23结束语24附录25参考文献30致谢31摘要本文研制一种基于51单片机实时控制的LCD液晶显示屏控制系统。硬件系统由单片机最小系统和液晶显示系统组成，PC机进行显示内容的编辑和字模数据的提取；液晶显示系统由主控模块T6963C和LCD液晶显示模块接口电路组成，主控模块负责接收单片机字模数据并控制各显示模块工作，显示模块以T6963C主控制器为核心，控制LCD液晶显示屏显示，为了方便系统扩展，各模块之间的连接采用接插式结构，单片机与PC机之间采用RS232标准接口进行数据和命令的串行通信。本文不仅从总体上对系统进行了整体规划，还以其中一个实例详细介绍了PC机字模的提取、字模数据的发送、单片机串行接收数据、液晶显示屏的显示等部分的软硬件设计及实现过程。本系统的设计优点硬件电路简单，软件功能完善，控制系统可靠，性价比较高等特点，具有一定的使用和参考价值。关键词：液晶显示器 89C51 串行通信 单片机 AbstractThis article designs with develops one kind based on 51 SCM(Single Chip Microcomputer ) thereal-time control LCD display monitor control system. Thissystem is composed by on SCM small system and LCD display system, on the PC machine carries on the demonstrationcontent the edition and matrix data withdrawing; LCD displaysystem controls the moduleand certain LCD by the hostdemonstrated the module T6963Ccomposes, the host controls the module T6963C to beresponsible for in the receive the SCM matrix data andcontrols each demonstration module work, demonstrated the module takethe host controls the module T6963C as a core, controls the LCD displaymonitor display,In order to the convenient system expands, between various modulesconnection uses meets inserts the type structure, between the SCM and PC machine to use the RS-232 standard to carry on the data and the order serialcommunication. This article not only has carried on the whole planfrom the overall to the system, but also in detail introduced takemodule design as the example the PC machine matrix withdraws, thematrix data transmission, the monolithic integrated circuit serialreceive data, the LCD display monitor display and so on the partial software andhardware