毕业设计（论文）-煅烧颗粒水泥回转窑设计.doc

本科毕业论文（设计） 煅烧颗粒水泥回转窑设计 系 （部） 专 业 学 号 学生姓名 指导教师 提交日期 2015年5 月 10日 摘 要 水泥回转窑属于建材设备类是水泥熟料干法和湿法生产线的主要设备。回转窑广泛用于冶金、化工、建筑耐火材料、环保等工业。该回转窑由筒体，支承装置，带挡轮支承装置，传动装置，活动窑头，窑尾密封装置，喷煤管装置等部件组成。回转窑的窑体与水平呈一定的倾斜，整个窑体由托轮装置支承，并有控制窑体上下窜动的挡轮装置。 Abstract Cement kiln belong to the building materials equipment class that is cement clinker dry and wet production line of the main equipment. Kiln widely used in chemical industry, metallurgy, building refractory, environmental protection industry and so on. By the kiln tube body, supporting devices, with a round of supporting block device, transmission device, activity kiln head and tail kiln seal device, such as coal spray tube device components made up. The kiln kiln body level with a certain amount of tilt show, the whole body kiln by supporting tora round device, and has control of the body of the kiln channeling move up and down the block device round, and so on. This paper studies the object is calcination particles cement kiln design, the paper introduces the first turn pits application of the status quo, turning the working principle of pits, structural composition and classification and its application, then at home and abroad to rotary pits present situation and development trends for analysis. Chapter ii determine rotary pits overall design scheme and their works, including rotary pits rotary tube, the body of the frame, support transmission systems such as key components of the selection and calculation, determine the motor drive selection (power, speed), including reducer, coupling components such as choice. Chapter iii focus for rotary pits support for parts of the design: thanks to roll support computing power, and thanks to determine roller thanks to the size of roller axis after checking for strength; The structure of the body of the tube design, and its support point location calculation and bending calculated check. In the