毕业论文外文文献翻译Automatic-Position-Determination自动定位技术.docVIP

毕 业 设 计（论文） 外 文 文 献 翻 译 文献、资料中文题目：自动定位技术 文献、资料英文题目：Automatic Position Determination 文献、资料来源： 文献、资料发表（出版）日期： 院 （部）： 专 业： 班 级： 姓 名： 学 号： 指导教师： 翻译日期： 2017.02.14 Automatic Position Determination 1 Position Determination The traditional method for the direct determination of position has been by astronomical observation. The relative positions and movements of the stars as well catalogued and so with a combination of altitude, direction and time observations to the stars, the position in terms of latitude and longitude of a ground station can be calculated. There if less call for direct position determination nowadays since most countries are covered by a primary horizontal control scheme, and the absolute position of any new local survey word can be established by including a national reference point in the local survey. In very remote areas, or where the terrain is totally unsuitable for the classic survey methods of triangulation and traverse, there is, however, a need for direct position determination. For the majority of this work, visual observation to the stars has been replaced by electromagnetic measurements to or from artificial earth satellites. In addition, the relative positions of survey stations can be determined directly by inertial techniques originally developed for aircraft navigation. 1.1 Inertial Positioning A pair of gyros are incorporated in a position fixing device known as the Auto-Surveyor manufactured by Litton Systems. It has originated from an aircraft navigation system, which was developed for military applications into its present three-dimensional survey system. ‘Hardware’ consists of (i)the inertial measuring unit, (ii)a computer ,(iii)a cassette recorder,(iv)a display and control unit and (v) the power supply .These items can be placed anywhere within a road vehicle or helicopter providing that the operator is close to (iv). The measuring unit contains a gyro-stabilized platform with two air-bearing g