HP NGIS产品培训_2010.pptVIP

* (notes for Ric) ? All systems will initially be released with HP-UX 11i v3. OVMS and Windows will be released with other post SR1 functionality BL8x0c i2 (aka Kauai) 2, 4, 8s Blades at initial release on HPUX in April 27th this year First release key features: 4GB DIMM, HPVM w/v2 guests on v3, Virtual Connect These features to release by year end: 8 16GB DIMM, OVMS, Windows (OVMS, 8GB DIMM, and Rackmount bundles expected in Sept, other stuff in Dec) Items of interest releasing in 2011: Flex FC, FCoE, Field upgrade kits, and npars. (nPars is currently lining up mid 2011, med risk that it moves right – OS and FW work to make this happen) (Field upgrade kits will enable upgrading 2s to 4s to 8s) Superdome 2 (aka Buccaneer) Superdome 2 w/HPUX releases in Aug of 2010: -Single chassis scalability to 16 socket SMP -Up to 1TB Max Memory capacity per enclosure (4GB DIMM) -up to 8 nPars, -vPars -HPVM (w/v2 guests on v3 hosts) -32s bundles (this is where we sell two 16 socket systems in one rack and promise to upgrade later. Ken will cover this in his breakout session) Later Superdome 2 releases -Expect to see 32s and 8GB DIMM support in mid 2011. -Message that dates are still being worked for these notable features: Virtual connect, Mezz cards, Windows, and Dynamic vPars. (Ric, Mezz and VC currently lining up Q1/12, dynamic vpars is Q3/12. Recall the conversation about “HPVM is the go forward virtualization ……..” and that Static vpars (SR1) covers over 90% of the use cases.) FYI, Windows is base plan for SR3 Q1/12, though likely can release earlier Rx2800 i2 (aka Sentosa) Rx2800 releases w/HPUX late 2H2010 Expect the following features at initial release or within a few (~4) weeks: up to 256 GB Memory capacity w/16 GB DIMM, Windows, OVMS, HPVM w/v2 guests on v3 hosts. Fenway will be released within 1qtr of SR1 * HP Confidential * When we set out to design these systems, we knew that Blades-based architectures were a smart design choice for common IT, with modula