BS EN 不锈钢.通用耐腐蚀钢制半成品、棒材、杆材、线材、型材和光亮产品的交货技术条件.doc

BS EN 10088-3-2005 不锈钢.通用耐腐蚀钢制半成品、棒材、杆材、线材、型材和光亮产品的交货技术条件9615 BRITISH STANDARD BS EN 10088-3:2005 Stainless steels — Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes The European Standard EN 10088-3:2005 has the status of a British Standard ICS 77.140.50; 77.140.65; 77.140.20 ?????????????????????? ?? ?????? ?? ?????????????????????????????????????? ?????????????????? ?????? ???????????????????? ?????? BS EN 10088-3:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2005 ?? BSI 30 June 2005 ISBN 0 580 46390 National foreword This British Standard is the official English language version of EN 10088-3:2005. It supersedes BS 1554:1990 and BS EN 10088-3:1995 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/30, Stainless steels, which has the responsibility to: BS EN 10088 is published in three parts. Two further parts of this series (prEN 10088-4 and prEN 10088-5) are currently in preparation and have been designed to meet the needs of the Construction Products Directive (CPD). A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. ? aid enquirers to understand the text; ? present to the responsible int