new08-B737-01-地面电源.docVIP

地面电源操作 编号：28-B737-01 1. General A. These procedures contains the tasks includes: (1) Practice - Ground power unit . (2) Supply external power to the buses (3) Remove external power from the buses B. The tasks give steps to energize the ac and dc buses for maintenance or ground servicing. The tasks also give steps to remove electrical power from the airplane. C. The task that removes power gives instructions to move the BAT switch to the OFF position. WARNING: If you let the BAT switch stay in the ON position without ac power, the electrical power of the battery will decrease. The electrical power of the battery can decrease at a rate of 30 to 40 amps. At this rate, the battery will have no electrical power after one to two hours. WARNING: When the external air temperature is more than 100 (37.8), electrical equipment can become too hot. If you supply electrical power for more than 20 minutes, you can supply conditioned air (AMM 21-00-00/201) to keep the electrical equipment cool. 2. Practice – Ground power unit. A. General: 1). There are 2 types of Ground power unit in service. 2). The Ground power unit usually used to power DOR328 in ground. 3). The Ground power diesel can serve to all types of airplane with its power matching the airplane’s power. B. Procedures: TYPE: Ground Power Unit Examine the external power supply cord and the airplane external power supply receptacle before you connect the external power supply to the receptacle. If you find excessive arc erosion, corrosion and heat damage or discoloration to the pins or receptacles, repair the problems that you find. Contact cable to airplane. Operate the unit to ready for service. (WARNING-1) Supplied electrical power to airplane. (WARNING-2). TYPE: Ground Power Diesel Examine the external power supply cord and the airplane external power supply receptacle before you connect the external power supply to the receptacle. If you find excessive arc erosion, corrosion and heat damage or discoloration to t