安全交底(高处施工).doc

No. SAFETY INSTRUCTION TRAINING RECORD FOR HIGH LOCATION JOB ITPCL CUDDALORE PROJECT SECTION OR DEPARTMENT： Location andWork EngineerIn charge Name of the sub-contractor DATE ATTENDEE(signature) Total number of Attendees : CONTENT AND REQUIREMENT NOTE: This specification is for high place job procedure, before operation shifting this document should be read familiarly by engineer and informing the labors. ⅠGeneral Precautions 1, where the work more than two meters from the ground to ground, should be referred to high-altitude operations, should be implemented in accordance with the provisions of this Directive. Who can do the work on the ground, they have to be done on the ground to minimize the high-altitude operations. 2, as the workers in high places must be in good health, mental illness, epilepsy and physician identification with hypertension, heart disease and other illnesses should not be engaged in higher operating personnel are not allowed to participate in the high-altitude operations. Where found the staff there drinking, lack of energy prohibit aerial work. 3, higher than the operating personnel must be professional and technical training, special types of personnel must be certified. Before construction safety and technical education should be gradual and correspondent, the implementation of all safety technical measures. Workers must wear and use proper protective equipment. 4, the height required for the job security of supplies and protective equipment, signs, tools, instruments, electrical facilities, must be checked prior to the application or testing standards, it can be put into use. 5. Make the staff working at height, must be worn in good company issued before the job overalls, non-slip rubber insulated shoes, helmets and fasten your seat belt aerial work, clean up the area around the high-altitude operations and sundry items 6. When operating at high altitude, you must at least have