camera_feature introduction_图文.pptVIP

  • 43
  • 0
  • 约3.17千字
  • 约 21页
  • 2018-05-24 发布于河北
  • 举报
camera_feature introduction_图文

Camera Feature Introduction Camera Feature Preview / still capture / recording Still capture modes Zero Shutter Lag (ZSL) Video snapshot (Still capture during video) High Dynamic Range (HDR) Burst Shot Panorama Face Detection/Smile detection/Face Beautify/Best Shot Camera Settings Auto Focus/Auto Exposure/Auto White Balance Metering Mode 5/24/2018 © 2014 Marvell Confidential. All rights reserved. 2 Zero Shutter Lag Old: Limited ISP/sensor throughput, switch to lower resolution for preview ZSL: High throughput, always process in full size @ 30fps. No switch needed What you want What you get  5/24/2018 © 2014 Marvell Confidential. All rights reserved. 3 Capture During Video 5/24/2018 © 2014 Marvell Confidential. All rights reserved. 4 Since Galaxy S4, full size still image can be captured while recording video GS3 GS4 zoom 5/24/2018 © 2014 Marvell Confidential. All rights reserved. 5 More advanced capture modes 5/24/2018 © 2014 Marvell Confidential. All rights reserved. 6 Burst Face Detection HDR Panorama Fast and slow recording 5/24/2018 © 2014 Marvell Confidential. All rights reserved. 7 Bigger pixel 5/24/2018 © 2014 Marvell Confidential. All rights reserved. 8 Pelican Imaging 5/24/2018 © 2014 Marvell Confidential. All rights reserved. 9 vcm 5/24/2018 © 2014 Marvell Confidential. All rights reserved. 10 OIS 5/24/2018 © 2014 Marvell Confidential. All rights reserved. 11 Image Quality Algorithms Lens Shading Correction Shading cause: Non-uniform illumination Non-uniform camera sensor sensitivity Non-uniform of the lens Shading types: luminance shading and color shading Marvell Confidential +Lens Shading Correction Marvell Confidential anti-banding Flicker(闪烁) 行曝光是逐行扫描方式取像,每次曝光只取得一个阵列的像素元图像,N次曝光后,将之前所取得的像素元图像拼合成一张完整的图片。 帧曝光则是一次曝光即取得完整图像 5/24/2018 © 2014 Marvell Confidential. All rights reserved. 16 这种现象与行曝光时间有关。一个50HZ的光源的电压曲线为正弦曲线,其光能量曲线定性分析可以认为是取了绝对值的电压曲线,即光能量做1/100 s的周期变化。所以要求曝光时间必须是1/100秒的整数倍。如果没有把曝光时间调整到1/100秒的整数倍,就有可能会使每行的曝光值不一样,造成同一 个image上有水波纹现象。 5/24/2018

文档评论(0)

1亿VIP精品文档

相关文档