XXXXXX加工工艺研讨模板.docVIP

XXXXXX加工工艺研究 作者姓名：X X X 专业名称：XXXXX 指导老师：XXX 摘要 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 关键词：XXX XXX XXX XXX Abstract In order to enable the Practices to study the table tennis technology well and achieve the goal of building their body and exercise，considering the characteristics of the table tennis served，a new kind of table tennis serving machine was designed in this thesis: That is the self-control table tennis serving machine. The mathematical model was established under the table tennis of mechanics analysis in fling. The reasonable spans of the Parameters about controlling the falling ball Points were confirmed. It can serve all kinds of balls for the practitioners. It controls the speed，the angle and the rotation direction of the ball by using the computer. The random serving Patten was designed. The fall points of the table tennis become randomly，by the randomization of the serving speed，angle and height. KEYWORDS: the table tennis serving machine, the double wheels, face to face circumrotating, movement analysis, serving pattern  目录 摘要 I Abstract II 目录 III 前言 1 1 绪论 2 1.1XXXX行业的研究 2 1.1.1我国XXXXX行业发展模式现状与方向 2 1.2XXXXX的研究 3 1.2.1XXXXX国内外研究现状 3 1.2.2XXXXX加工工艺过程发展 5 1.3本次论文的XXXX加工方法和目的的研究 5 1.3.1本次论文的目的 6 2XXXXX传统加工方法 7 2.1XXXX 7 2.1.1XXXX 7 2.1.2XXXXX 8 2.1.3XXXXXXXXXXX 9 2.1.4XXXXXXXXXXX 9 2.1.5XXXXXXXXX 10 2.1.6XXXXXXXX 12 2.2XXXXXXXX 14 2.3小结 15 3XXXXXXXXXX 16 …………………… ………………… 4XXXXXXXXXXXXXXXXXXX 24 ………………… …………………. 5 XXXXXXXXXXXXXXXX 30 …………………. …………………… …………………. 总结 35 ………. ………. ………. 致谢 36 参考文献 37  前言 随着全球能源及原材料价格的不断上涨，汽车销售价格的下降，XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX这就要求零件设计结构、机械性能也要相应有所改变，向着小巧紧凑，高强度、高刚性方向改进，进而也要求有新技术、新工艺来保证能够制造出来。 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX