GM123_124M通用制动管.pdf

ENGINEERING Material Specification GM123M STANDARDS Metals Automotive Steel Tubing For Fluid Handling GM124M should not be used for fuel lines because 1 Scope residual copper can contribute to the formation of sour gas. See Figure 1. These specifications cover two types of steel tubing suitable for automotive uses. There are 1.2 GM124M. Covers single wall construction requirements for the base metal, the optional tubing wherein the joint is electric resistance coating materials, and the coated tubing. These welded. It is recommended for fuel lines, power requirements are applicable to the product steering lines, transmission oil cooler lines, coming out of the tube mills and the coating lubricating oil lines, vacuum lines, etc. See application lines, which are sometimes separate Figure 1. facilities. This tubing is used in the production of 1.3 Tubing Designation Code. It is customized parts and assemblies. It is recommended that the codes in paragraph 3.1 recommended that those parts and assemblies be used on drawings and purchase orders to be validated for corrosion performance, designate tubing type, outside diameter, wall conductivity and continuity, strength, thickness, manufactured condition finish and the appearance,