更换SSA RAID阵列中硬盘的步骤.doc

建了RAID的磁盘阵列在使用过程中可能会发生硬盘出现故障需要更换的情况，本文介绍了安全更换硬盘而不破坏数据的详细步骤。 1. 首先需要从RAID定义中逻辑上删除故障硬盘。执行下面的命令：# smit ssaraid- Change Member Disks in an SSA RAID Array---- Remove a Disk from an SSA RAID Array 2. 屏幕显示出如下的阵列列表：Change Member Disks in an SSA RAID Array Move cursor to desired item and press Enter. Remove a Disk From an SSA RAID ArrayAdd a Disk to an SSA RAID ArraySwap Members of an SSA RAID Array-----------------------------------------------------------------------SSA RAID Array Move cursor to desired item and press Enter. Use arrow keys to scroll. hdisk6 --6010337B163E30K good --2.3GB -RAID-5 array hdisk5 -02137K good --2.3GB -RAID-5 array F1=Help ---F2=Refresh ---F3=Cancel F8=Image --F10=Exit -----Enter=Do /=Find --- n=Find Next -----------------------------------------------------------------------选择要删除的硬盘所在的阵列的名称，在本例中选择 hdisk6。 3. 屏幕显示如下的信息：Remove a Disk From an SSA RAID Array Type or select values in entry fields.Press Enter AFTER making all desired changes.------------------------------------------[Entry Fields]SSA RAID Manager ---------------------------ssa1SSA RAID Array -----------------------------hdisk6Connection Address / Array Name ------------6010337B163E30K* Disk to Remove ---------------------------------------------+F1=Help ---F2=Refresh ---F3=Cancel ---F4=ListF5=Reset --F6=Command ---F7=Edit -----F8=Image F9=Shell --F10=Exit -----Enter=Do 按下F4键，列出属于该RAID阵列中的硬盘。 4. 硬盘列表显示如下：Remove a Disk From an SSA RAID Array Type or select values in entry fields.Press Enter AFTER making all desired changes.------------------------------------[Entry Fields]SSA RAID Manager ---------------------ssa1SSA RAID Array -----------------------hdisk6Connection Address / Array Name ------6010337B163E30K* Disk to Remove ---------------------------------------+----------------------------------------------------------------------------------------------Disk to Remove Move cursor to desired item and press Enter. Use arrow key