TC24C04两线程EEPROM存储芯片.pdf

TC24C04A Two-Wire Serial EEPROM 4K, 8K and 16K (8-bit wide) FEATURES  Low voltage and low power operations:  TC24C04A/08A/16A: VCC = 1.8V to 5.5V  Maximum Standby current 1µA (typically 0.02µA and 0.06µA @ 1.8V and 5.5V respectively).  16 bytes page write mode.  Partial page write operation allowed.  Internally organized: 512 x 8 (4K), 1024 x 8 (8K), 2048 x 8 (16K).  Standard 2-wire bi-directional serial interface.  Schmitt trigger, filtered inputs for noise protection.  Self-timed Write Cycle (5ms maximum).  1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility.  Automatic erase before write operation.  Write protect pin for hardware data protection.  High reliability: typically 1, 000,000 cycles endurance.  100 years data retention. o o  Industrial temperature range (-40 C to 85 C).  Standard 8-lead DIP/SOP/MSOP/TSSOP/DFN and 5-lead SOT-23/TSOT-23 Pb-free packages. DESCRIPTION The TC24C04A/08A/16A series are 4,096/8,192/16,384 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 512/1,024/2,048 words of 8 bits (1 byte) each. The devices are fabricated with proprietary advanced CMOS process for low power and low voltage applications. These devices are available in standard 8-lead DIP, 8-lead SOP, 8-lead TSSOP, 8-lead DFN, 8-lead MSOP, and 5-lead SOT-23/TSOT-23 packages. A standard 2-wire serial interface is used to address all read and write functions. Our extended VCC range (1.8V to 5.5V) devices enables wide spectrum of applications. PIN CONFIGURATION Pin Name Pin Function A2, A1, A0 Device Address Inputs