IVO-M190MWW3 R0 IIS FOR 越海.pdfVIP

InfoVision Optoelectronics ( Kunshan ) Co.,LTD. Document Title M190MWW3 Incoming Inspection Standards Page No. 2/6 Document No. A-M190MWW3-R0-162-01 Issue date 2010/12/22 Revision 00 Revision Date Page Old Description New Description Remark 00 2010/12/22 -- -- First issued. NO.1 Long Teng Road, KunShan City, JiangSu, China Tel:0512 InfoVision Optoelectronics (Kunshan) Co., LTD Fax:0512 InfoVision Optoelectronics ( Kunshan ) Co.,LTD. Document Title M190MWW3 Incoming Inspection Standards Page No. 3/6 Document No. A-M190MWW3-R0-162-01 Issue date 2010/12/22 Revision 00 1.0 Inspection Standards for LCD Modules 1.1 Description These inspection standards shall be applied to LCD Module supplied by InfoVision Optoelectronics ( Kunshan ) Co.,LTD 1.2 The environmental condition of inspection The environmental condition and visual inspection shall be conducted as below (1) Ambient temperature:15~25℃ (2) Humidity:25~75%RH (3) External appearance inspection shall be conducted by using a single 20W fluorescent lamp or equivalent illumination. (4) Panel visual inspection on the operation condition for cosmetic shall be conducted at the distance 35cm or more between the LCD module and eyes of inspector. And the viewing angle shall be 90 degree to the front surface of display panel Ambient Illumination:400~600 Lux for external appearance inspection Ambient Illumination:100~200 Lux for light on inspection 1.3 Method of sampling inspection Unless defined in the other document, the sampling meth