特9发动3.pdfVIP

C-9 Engine - 37 - 11/01 ELECTRONIC CONTROL SYSTEM 28 ELECTRONIC CONTROL SYSTEM Introduction This section of the presentation explains the C-9 Electronic Control System including the following components: - ECM - Personality Module - Timing Wheel Also covered are the following subsystems and related procedures: - Timing Control - Fuel Quantity Control - Speed Control - System Calibrations NOTE: There is no separate Cold Mode on the C-9 engine. C-9 Engine - 38 - 11/01 29 • ECM: The principle component in the HEUI system, the Electronic Control Module (ECM) is mounted on the left hand side of the engine. - Governor - Fuel system The ECM is the brain of the engine, it functions as the governor and fuel computer - Injection timing system computer. The ECM receives all the signals from the sensors and controller energizes the injector solenoids to control timing and engine speed. The ECM also communicates with the instrument display system, usually the • Communicates with Caterpillar Monitoring System through the Cat Data link. Cat Monitoring system