ZC-7型兆欧表英文说明书.docxVIP

TYPE ZC-7INSULATION TESTER TPYPE ZC-7 INSULATION TESTERApplicationType ZC-7 portable insulation tester is used for measuring the insulation resistance of transformers, cables, electrical, machines and apparatus.Construction The tester consists of a hand-driven A.C. generator, Silicon diode rectifier and an internal magnet type cross current ratio meter. The instrument is enclosed and tightly sealed in a diecast Aluminium case.Outstanding feature Long scale-over 80mm:clear scale and wide range;Silent generator-the rotary magnet type generator turns extremely smooth and silent. The generated voltage is not over 120% of the rated voltage at the crank speed more than 120 r.p.m.;No adjustment required-calibration is not necessary before measurement. The tester is simple and easy to operate;Perfect screen –measuring of the insulation resistance to earth,the instrument is so designed the earth current can not affect the measurement in any way;Perfect external magnet shield-the indicator employs a core magnet system in which eht yoke acts as a self-shield makes the external magnet field influence quite negligible;Little and light-the instrument is housed in a gray diecast Aluminium case, so it is little in volume, and light in weight;Tightly sealed-the tester is so tightly sealed to prevent the ingress of moisture.Operating principleThe indication movement consists of two master coils, current coil L1, and voltage coil L3, are fixed at an angle to one another. Coil L1 is connected through terminals L and E in series with the resistance to be measured. Coil L3 is connected across the D.C. voltage supple, which is generated from the D.C. converting systems. When current flows through them, coil L1 Produces the deflecting moment which is inversely proportional to the resistance under test, coil L3 produces the control moment which is directly proportional to the supply voltage.The turning moment of the coil L3 tends to turn the pointer in an anti-clockwise direction, while