毕业设计（论文）某12万吨日城市污水处理厂的A2O工艺设计.docVIP

毕业设计（论文）--某12万吨日城市污水处理厂的A2O工艺设计 污水进水水质 单位mgL 项目 CODcr BOD5 NH4-N SS TN0 TP0 含量 270 135 30 135 30 3 A2O工艺具有良好的脱氮除磷功能该污水厂的污水处理流程为污水从粗格栅到污水提升泵房再从泵房到细格栅然后到旋流沉砂池再进入生物池即A2O反应池再从生物池进入二沉池污水再经过接触消毒池后排入自然水体污泥处理流程为旋流沉砂池产生的垃圾直接外运处置二沉池产生的剩余污泥则运入贮泥池二沉池的回流污泥则通道管道污泥回流泵房再次进入A2O反应池经过贮泥加药处理后的污泥进入污泥浓缩脱水车间最后外运处理污水处理厂处理后的出水水质要达到《城镇污水处理厂污染物排放标准GB 中的一级b标准该标准的具体数据如下表所示 出水水质标准 单位mgL 项目 CODcr BOD5 NH4-N SS TN0 TP0 含量 0 20 15 20 15 1 关 键 词A2O工艺脱氮除磷污水处理污泥处理 THE A2O PROCESS DESIGN OF A CITY SEWAGE TREATMENT PLATE ABSTRACT The subject of this graduation project for a municipal sewage treatment plant process design桝2O processfMain task is to complete the layout of the sewage treatment plantthe preliminary design of the various structures and construction plans of dealing with the design of structures To complete the preliminary design of a design manual wastewater treatment plant with a floor plan flow chart of a sewage treatment plant and the design of three main structuresdesign of the main design of structures mainly is the biological pool secondary sedimentation tank design and contact disinfection tank This sewage treatment plant projectthe scale is m3d The influent water quality is in the table below Influent water quality unitsmgL Project CODcr BOD5 NH4-N SS TN0 TP0 Content 270 135 30 135 30 3 The selected A2O process has a good Nitrogen and Phosphorus RemovalThis sewage treatment plant for the sewage treatment process is sewage from the coarse grid to enhance the pumping stationthen from the pump to the fine gridAnd then to the cyclone grit chamber then entering the biological pool A2O reactor then from the pool into the secondary sedimentation tankafter exposure to water disinfection and then discharged into the natural water Sludge treatment process is vortex grit chamber sludge i