弹簧钢55SiCrA轴向疲劳行为地试验研究.pdfVIP

　46　 1 　Vol.46, No.1 　2 0 1 1 1 Iron and Steel January　2011 55SiCrA 肖金福, 　刘雅政, 　孙小军, 　孙景宏, 　谢建新 (, 100083) 　: , 。 Am sler HFP 5000 55SiCrA -, S-N , (S M) -DAX , , 7 。:820 MPa, σ /σ=0.562(N =10 ); -1p b f , (20～ 30μm); 1.5～ 2.0μm。 :;;; :A 　　:0449-749X(2011)01-0080-06 Axial Tension and Compression Load Fatigue Behavior and Mechanism of Spring Steel 55SiCrA XIAO Jin-fu, 　LIU Ya-zheng, 　SUN Xiao-jun, 　SUN Jing-hong, 　XI Jian-xin (School of Materials Science and ngineering, University of Science and Technology Beijing, Beijing 100083, China) Abstract:Improving the fatigue properties of spring steel has became an important theme of R D on spring steel with continuous improvement requirements of automotive lightw eight and safety.The axial tension and compression load fatigue behavior of spring steel 55SiCrA w as studied by Amsler HFP 5000 high-frequency fatigue testing ma- chine.Fatigue limit and S-N curve were measured.Fracture surfaces and non-metallic inclusions w ere observed by S M and -DAX, and mechanism of fatigue failure w as analyzed.The results show that the fatigue limit of 55SiCrA 7 is 820MPa and σ /σis 0.562 (N =10 ).Fatigue crack initiates mainly from surface and non-metallic inclusions -1p b f (20-30μm).Fatigue striation in fatigue crack grow th zone is 1.5-2.0μm in width. Key ords:spring steel;fatigue behavior;non-metallic inclusion;mechanism of fatigue failure 　　, 0.56C-1.42Si-0.68Mn-0.68Cr-0.014P-0.007S, 。, 14mm, “BOF—LF—RH —