阀体加工工艺与夹具.docVIP

摘 要用夹具装夹工件时，工件相对于刀具及机床的位置精度由夹具保证，不受工人技术水平的影响，使一批工件的加工精度趋于一致。使用夹具装夹工件方便、快速，工件不需要划线找正，可显著地减少辅助工时工件在夹具中装夹后提高了工件的刚性，可加大切削用量；可使用多件、多工位装夹工件的夹具，并可采用高效夹紧机构，进一步提高劳动生产率。关键词： Abstract Mechanical production process from raw material to finished product all the labor process. It includes a blank manufacturing, parts machining and heat treatment, machine assembly, inspection, testing, and painting and other processes. Process is the most active factor of production. Machining process is to achieve product design, product quality, save energy and reduce consumption of the important means is the most active factor of production.It is both a concept and ideas, but also real ways and means, and to implement in the workpiece, machine tools, fixtures posed by the process system. In the development process, we must determine the installation process station and the process needs further work, processing of the process of locomotives and machine tools, feed rate, cutting depth, spindle speed and cutting speed, the process of the fixture, tool and gauge, there are the cutting times and tool path length, the final calculation of the basic time of the process, support time and effort to service. Machine tool clamping fixture is a device to the workpiece relative to the machine tool and cutting tool workpiece have a correct position, and during processing to maintain the same position. Using the fixture workpiece clamping of the workpiece relative to the location of machine tools and precision guaranteed by the fixture, without technical skills, which makes the number of workpiece machining precision of line．Workpiece clamping fixture easy to use, fast, crossed the workpiece does not need to find is, can significantly reduce the auxiliary working hours, after clamping the workpiece in the fixture to improve the rigidity of the workpiece can be increased cutting; can use multiple pieces, multiple bit workpiece clamping fixture, clamping bodies can be used efficiently to further improve labo