dynamips 报错与非正常现象的解决办法.docVIP

dynamips 报错及非正常现象的解决办法发表于 2008-8-12 所有问题的解决方法请遵循以下步骤1.请确认您的操作系统的TCP/IP模块没有被精简，被精简的代表有番茄花园、电脑城装机等部分版本操作系统2.请确认您下载了最新的更新包，并按照更新包中的使用说明正确安装了更新包3.请确认按照正确步骤正确安装了WinPcap并获取了非无线设备的网卡参数，请确认您获取参数的网卡在使用dynamips时没有被禁用4.请确认dynamips使用的端口（一般为7200、3001~3008以及UDP端口）没有被其他程序占用，端口使用情况查看请使用cmd中 netstat -a 命令，请退出不必要的程序（如迅雷等多端口下载程序），请检查防火墙是否阻止了服务端的通讯，若UDP端口被占用，请运行setup目录下的UDP端口号修改程序5.启动各设备，若提示无idlepc值，请使用idlepc get XX获取，使用idlepc save XX db保存 引用: 现象一:Reading configuration file...Error: timed out communicating with dynamips server localhostExiting...Press ENTER to exit请参照步骤3、4 引用: 现象二 :Error: lost communication with pemuwrapper server localhostIt may have crashed. Check the pemuwrapper server output.请参照步骤3、4 引用: 现象三 :Reading configuration file...*** Warning:??Connecting SW1 port 2 to access 1 NIO_gen_eth:\Device\NPF_{********-****-****-****-************} resulted in:? ?? ???206-unable to create generic ethernet NIO*** Error:??errors during loading of the topology file, please correct themPress ENTER to continue请参照步骤4 引用: 现象四 :Reading configuration file...*** Dynagen has crashed ****Please open a bug report against Dynagen at http://www.ipflow.utc.fr/bts/Include a description of what you were doing when the error occured, yournetwork file, any errors output by dynamips, and the following traceback data:Traceback (most recent call last):??File dynagen, line 910, in ???File dynagen, line 729, in import_config??File dynamips_lib.pyc, line 282, in __init__??File dynamips_lib.pyc, line 2033, in senderror: (10054, Connection reset by peer)Press ENTER to exit请参照步骤3 引用: 现象五 := start R1Warning: Starting R1 with no idle-pc value100-VM R1 started请参照步骤5 引用: 现象六 :请关闭所有dynamips相关窗口，然后清空tmp目录 引用: 现象七 :vlan database exit时% not enough space on flash to store vlan database. trying squeeze...First create squeeze log by erasing the entire device% error squeezing flash - (Missing or corrupted log)% not enough space on flash to store vlan database. tryin