BS 412005 结构钢型材.热轧型钢规范.pdfVIP

BRITISH STANDARD BS 4-1:2005 Structural steel sections — Part 1: Specification for hot-rolled sections ICS 77.140.70 BS 4-1:2005 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee ISE/13, Structural steel sections, upon which the following bodies were represented: British Constructional Steelwork Association Limited Department for Transport — Highways Agency Galvanizers Association Institute of Healthcare Engineering and Estate Management Steel Construction Institute UK Steel Association This British Standard, was published under the authority of the Standards Policy and Strategy Committee and comes into effect on 19 August 2005 © BSI 19 August 2005 First published November 1903 Second edition August 1921 Third edition March 1932 Fourth edition February 1962 Fifth edition January 1972 Sixth edition November 1980 Seventh edition December 1993 Eighth edition August 2005 Amendments issued since publication Amd. No. Date Comments The following BSI references relate to the work on this British Standard: Committee reference ISE/13 Draft for comment 05DC ISBN 0 580 46453 9 BS 4-1:2005 Contents