李家坝矿矿井施工组织设计最终版.docVIP

编号：（ ）字 号 本科生毕业设计 设计题目： 李家坝矿矿井施工组织设计 专 题： 张性断层充填物相似材料研制及其物理力学性质研究 姓 名： 学 号： 班 级： 土木工程 二○一五年六月摘 要 本毕业设计主要包括部分，第一部分是；第二部分是施工组织设计；第三部分是专题部分， 在第一部分中，第二部分 第三部分是专题部分，。ABSTRACT This graduation design mainly includes four parts.The first part is the basic situation of the Lijiaba coal mine; the second part is the construction organization design of Lijiaba coal mine；the third part is the part of the tspecial subject , tensional fault filling similar material preparation and its physical and mechanical properties;the fourth is part of the translation. In the first part, combined with the 《Lijiaba mine preliminary design specification》 mainly introduces the Lijiaba coal mine, natural geographical conditions, the basic situation of the construction arrangement in the process . The second part, according to the 《Lijiaba mine preliminary design specification》, combined with the first part, I will talk about the preparation before construction, shaft construction, wellbore and bottom garage construction, the construction of tunnels in the mining area, construction general layout and built well total schedule etc. This part has an important guiding significance at actual construction . In addition, this part of the design is the most important part of the design. The third part is the special subject part. Firstly, the paper introduces the faults and filling, and then combining literature analysis and summary of fault filling materials preparation, while on the physical and mechanical properties in the analysis. Keyword: Lijiaba coal mine; inclined shaft; construction organization; open channel excavation; shaftbottom; construction general layout; schedule 目 录 一般部分 第一部分 基本情况 4.1主斜井生产系统 15 4.2副斜井生产系统 15 4.3矸石系统 15 4.4辅助设施 16 4.5工业广场总面积及建筑物工程量表 17 5 矿井主要技术经济指标 18 第二部分 李家坝煤矿井施工组织设计 1 建井施工准备 21 1.1建井施工条件 21 1.1.1供水 21 1.1.2供电 21 1.1.3运输 21 1.1.4通讯 21 1.1.5排水 21 1.1.6工业广场平整及排矸 21 1.1.7建井其他条件 22 1.2建井技术准备工作 22 1.2.1矿井施工方案 22 1.2.2主、副斜井井筒施工顺序 22 1.2.