汽车电子靠性测试标准简介.ppt

Code Letter for International Protection by Enclosures – Water Code Letters Based on Location in the Vehicle Reliability design test tool – HALT HAST HALT – 高加速寿命测试 ( Highly Accelerated Life Test ) HAST – 高加速温湿度测试 (Highly Accelerated Temperature and Humidity Stress Test) HALT – 高加速寿命测试 ( Highly Accelerated Life Test ) 快速發現產品的設計缺陷. 評估 改良產品的設計強度 ( design margins ). 減少研發時間及成本. 產品發表前, 消除設計的問題. 評估降低產品的成本效益. HALT 不是通過 (pass) 或失敗 (fail) 的測試. HALT是設計工程時的工具. HALT不可預設極限. 階應力程序 ( Step Stress Process ) 冷階 Cold 熱階 Hot 快速溫變 Rapid Thermal 振動階 Vibration 複合環境 Combined Environment Condition: -80 C to +170 C the minimun air temperature rate-of-change 45 C/min 6 axes random vibration(3 linear and 3 rotational) 2 Hz to 10 000 Hz HAST – 高加速温湿度测试 (Highly Accelerated Temperature and Humidity Stress Test) NOTE 1 Tolerances apply to the entire useable test area. NOTE 2 For information only. NOTE 3 The test conditions are to be applied continuously except during any interim readouts. NOTE 4 For interim readouts, devices should be returned to stress within the time specified in 4.5. NOTE 5 For parts that reach absorption equilibrium in 24 hours or less, the HAST test is equivalent to at least 1000 hours at 85 oC/85 %RH. For parts that require more than 24 hours to reach equilibriumat the specified HAST condition, the time should be extended to allow parts to reach equilibrium. NOTE 6 Caution: For plastic-encapsulated microcircuits, it is known that moisture reduces the effective glass transition temperature of the molding compound. Stress temperatures above the effective glass transition temperature may lead to failure mechanisms unrelated to standard 85oC/85% RH stress. External Standards/ Specifications ASTM D4728 IEC 60068-2-1 IEC 60068-2-14 IEC 60068-2-27 IEC 60068-2-29 IEC 60068-2-30 IEC 60068-2-38 IEC 60068-2-52 IEC 60068-2-64 IEC 60068-2-78 ISO 8820 ISO 12103-1 ISO 16750-2 ISO 16750-3 ISO 16750-4 ISO 20653 GM Group Standards/ Specifications GMN5345 GMW30