变电所10KV母线电保护系统设计毕业设计.docVIP

变电所10KV母线继电保护系统设计首先根据任务书上所给系统与线路及所有负荷的参数，分析负荷发展趋势。从负荷增长方面阐明了建站的必要性，然后通过对拟建变电站的概括以及出线方向来考虑，并通过对负荷资料的分析，安全，经济及可靠性方面考虑，确定了110kV，10kV以及站用电的主接线，然后又通过负荷计算及供电范围确定了主变压器台数，容量及型号，同时也确定了110kV10kV母线、高压隔离开关、高压开关柜、无功补偿装置等电气主设备的选型与校验。最后，根据最大持续工作电流及短路计算的计算结果，DESIGN OF RELAY PROTECTION SYSTEM OF 10KV QENERATRIX STATION ABSTRACT Substation is an important part of the power system, which directly affect the entire power system security and economic operation of power plants and users to link the middle part, play a role in transformation and distribution of electricity. Main Electrical wiring is a major part of power plant substation, electrical main wiring a direct bearing on the formulation of the plant (the) selection of electrical equipment, power distribution equipment layout, relay protection and automatic device established that it is part of the electrical substation investment in the size of the decisive factor. The design of the first book based on the task to the system and all load and line parameters, analysis of load trends. From the load growth illustrates the need for Jian Zhan, and then to the summary of the proposed substation and the outlet direction of consideration and analysis of information through the load, security, economic and reliability considerations, determine the 110kV, 10kV and the station main electricity cable, and then through the load calculation to determine the scope and power of the main transformer station number, size and model, but also identified the 110kV overhead lines, 10kV bus, high-voltage isolation switch, high voltage switchboard, reactive power compensation devices, electrical Main Equipment Selection and validation. Finally, based on the maximum continuous operating current and short-circuit calculation results, and make 10kv bus relay protection design and setting and achieving computer monitor. KEYWORDS: power system, short-circuit current, relay protection 目录 摘要 I ABSTRACT II 1、绪论 1 1.1概述 1 1.2选题意义 1 1.3 国内外发展10KV供电概况 1 1.4