基于单片机的快热式家热水器的设计毕业设计.docVIP

毕业设计 题 目 学 院 专 业 班 级 学 生 学 号 指导教师 二〇一四年月日热式电热水器热式电热水器热式电热水器  ABSTRACT In this paper ，with the continuous improvement of peoples living standards and improving the electrical environment, people performance requirements of water heater is constantly improving. Therefore, fast thermal home electric water heater is increasingly by people of all ages. The fast thermal design of water heater system based on chip technology, the keyboard, the display circuit for the auxiliary, the use of the water heater outlet temperature thermistor for real-time detection, and converting the detected temperature signal into a frequency, and then feedback to the microcontroller, and then measure the size of the frequency of the microcontroller in order to achieve indirectly measured temperature value purposes. The reason why the use of such method for detecting the temperature, because the temperature frequency conversion circuit is not only simple and reliable, and relatively low cost. In terms of controlling the heating power, the design uses a triac control microcontroller through the optocoupler will trigger signal to the thyristor, thyristor controlled to achieve the angle, thereby effectively controlling the heating power of the heating wire. In addition to the shutdown and over-temperature protection status can be safely and reliably off the heating power, also joined the relay circuit is used to effectively control the heating power. Through the software and hardware are debugging, and further hardware FBI, successfully achieved the control and detection of water temperature, can the successful completion of the design features of the graduation requirements. Taken together, the fast heat of water heater with less space, safe and convenient, time-saving advantages. Prospects for development of water heater fast heat is very broad, it will definitely usher in a great development