基于单片机的数字式轴角传感器设计-毕业论外文翻译.docxVIP

Design of Digital Type Axis-angle Sensor Based on Singlechip1, a2, b2, cYu Jianchao , Yu Xiangbin , Li Jun1Computer Science and Technology College of Jilin University, Gaoxinkaifa Zone, Changchun,China2Aircraft Control Department of Aviation University of Air force, Nanguang Zone, Changchun, Chinaaemail: 373506896@ bemail: yxb1234567@ cemail: lijun1234888@Keywords: RS232 interface; singlechip; digital type axis-angle sensor; synchronizer.Abstract. The synchronizer is often used for the measurement of axis-angle because of its simplestructure, reliability and high precision. But the output signal from the synchronizer is an analogsignal, so it is difficult to realize digital measurement. This paper introduces a measuring circuit basedon a singlechip. This circuit can produce exciting signal independently and no extra exciting powersupply is needed, making the application easy. The AC signals output from the synchronizer areconverted into DC signals and then measured directly by the singlechip. The measuring data, afterbeing processed, are turned into serial data to output through a RS232 serial interface. Thesynchronizer equipped with the circuit will be a digital axis-angle sensor. The sensor is of highprecision and reliability, low price, easy application and high practical value.1. IntorductionThe synchronizer is often used for the measurement of axis-angle because of its simple structure,reliability and high precision. The output signal from the synchronizer usually is measured by a kindof synchronizer measuring modules which can output a digital quantity corresponding to themeasured axis-angle. But for this kind of modules the extra exciting power supply usually is needed,[1]making the application more inconvenient . In addition, the module cannot joint together with the[2]synchronizer because of its big size . This paper introduces a simple measuring circuit to measurethe signal from the synchronizer. The circuit can produce exciting signal independently and no