毕业论文文翻译-电力在线监测与诊断配电系统.docx

Energy and Power Engineering, 2012, 4, 529-538/10.4236/epe.2012.46066 Published Online November 2012 (http://www.SciRP.org/journal/epe)Online Diagnosis and Monitoring for PowerDistribution SystemAtef Almashaqbeh, Aouda ArfoaElectrical Engineering Department, Tafila Technical University, Tafila, JordanEmail: dr.atef_almashakbeh@Received October 16, 2012; revised November 14, 2012; accepted November 26, 2012ABSTRACTRecently, power distribution system is getting larger and more complex. It is very difficult even for the experts to diagnosis and monitoring to made best action. This motivated many researchers to investigate power systems in effort to improve reliability by focusing on fault detection and classification. There have been many studies on problems but the results are not good enough for applying to real power system. In this paper, a new protective relaying framework to diagnosis and monitoring faults in an electrical power distribution system with. This work will extract fault signaturesby using ellipse fit using least squares criterion during fault condition. By utilizing principal component analysis methods, this system will identify, classify and localize any fault instantaneouslyKeywords: Fault Detection and Classification; Protective Relaying; PCA; PSCADIntroductionFault detection is a focal point in the research of power systems area since the establishment of electricity transmission and distribution systems. The objectives of a power system fault analysis is to provide enough information to understand the reasons that lead to an interruption and to, as soon as possible, restore the handover of power, and perhaps minimize future occurrences if possible at all [1]. Several techniques are adopted for pattern recognition of generating the high frequency signals Artificial Neural Network (ANN) and Wavelets among other powerful pattern recognition and classification tools. ANN based algorithms depend on identifying the different patterns of system variabl