ge水处理膜技术和应用案例.pptVIP

After the consolidation is completed, 23 different membrane types coming from 8 different polymer families will be produced in MTKA. Brand new casting line with complete automation of the different casting, coating and rinses. It runs at very high speed in a controlled environment for optimum product consistency for existing products. But this production equipment will also be a great tool for the development of new membranes. More than 80% of our production orders are for 25 elements or less. That’s why semi-automated rolling remains a key production tool for GE WPT. Experienced rollers are assisted by lightning tables, automated tension bar and rollers as well as light guides for glue lines. For high volume pure water elements, the fully automated element rolling equipment, also called Autowinder, has been commissioned in 2009. Autowinder The Autowinder is an automated element building equipment. The membrane, carrier and spacer rolls are positioned and are automatically unrolled, measured and cut to length. The membrane is carried by a tray that moves along one straight line from the membrane roll to the element rolling. The machine folds the membrane, feeds and positions the feed spacer, and then the glue is applied. Then the permeate carrier is positioned on top of the folded membrane, and the next folded membrane with carrier comes on top, etc. When the membrane pack is ready, it is further carried by the tray underneath the central tube dispenser and the white ABS central tube gets attached to the membrane pack. The assembly is then rolled by the machine. At the outlet of the autowinder, the rolled element has a transparent tape finish. Curing After rolling, the element are given enough time for the glue to cure. The cured elements are placed on the automated trimmer which cuts the elements to the right length by cutting through the glue line for an optimum sealing. The white ABS ATD is glued on the central tube after trimming and with another curing time