Driver Circuit for High-Power PIN Diode Switches高功率2级管.pdfVIP

APPLICATION NOTE Driver Circuit for High-Power PIN Diode Switches Introduction The Skyworks High-Power Pin Diode Switch Driver Circuit is a TTL/DTL compatible, DC coupled, high-speed PIN diode bias controller. Part No. EN33-X273 This driver reference design is designed to operate with the Skyworks series of high-power SPDT PIN diode switches. These include: SKY12207-306LF SKY12207-478LF SKY12208-306LF SKY12208-478LF SKY12209-478LF SKY12210-478LF SKY12211-478LF SKY12212-478LF SKY12213-478LF SKY12215-478LF Features High drive current capability (± 50 mA to ± 100 mA) This driver is designed to provide forward currents up to 100 mA 28 V back bias in off state for each diode, and 28 V reverse bias. It is designed for SPDT Fast switching speed approximately 142 nS switches operating with a CW input a power up to 100 W. The driver utilizes fast switching NPN transistors and Skyworks Low current consumption discrete PIN diodes. The driver is designed to utilize a VDD set to Single TTL logic input +28 V, but could operate with voltages as low as +5 V. Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@ • 203950A • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice. • March 28, 2016 1 APPLICATION NOTE • DRIVER CIRCUIT FOR HIGH-POWER PIN DIODE SWITCHES Table 1. Absolute Maximum Ratings1