压缩题库（Compression item bank）.docVIP

压缩题库（Compression item bank） Item Bank of compression section 1, compressor thin oil station strainer plugging should be how to deal with? Answer: 1, double compressor oil filter adopts manual switching station filtering system, filtering accuracy is 25, when the filter is blocked, then the two groups before and after the oil pressure differential increases to 0.15MPa, alarm system, you should open another filter exhaust valve to bleed, oil discharge, switch a quick switch handle, switch off and remove the cleaning cartridge. 2. What is the influence of insufficient air pressure on the compressor? Answer: compressor gas control system is through the top suction valve to achieve. The compressor suction valve is arranged on the top of the top opening of the valve member top line upper pipe and instrument cabinet two gas source connected to the interface of instrument air enters the top opening of the valve will open the suction valve plate, the suction valve is in a normally open state, and the side of the cylinder will no longer reference work, when the pressure is low, will not be able to open the valve unable to adjust, 0%, 50%, 100% and three conversion period of gas. 3. The false liquid level of the methyl ether cooler leads to the liquid handling of the refrigerator Answer: (1) immediately off the throttle valve. (2) contact the dispatcher to send the standby power to the standby machine. (3) refrigerator with stopping liquid. (4) observe the compressor inlet temperature change, adjust the load of refrigerator at any time. (5) contact the level meter of automatic control and instrument maintenance. 4, compressor post compressor inlet valve flange leakage, how to behave, how to deal with? Answer: (1) compressed field is filled with strong ether odor; a section of intake pressure has decreased significantly (2) quickly open all axial fans, strengthen air circulation; notify dispatchers to maintain on-site maintenance; strengthen on-site inspection, and prevent all