鸡西城山煤井设计说明书.doc

摘 要 本设计为城山煤矿0.9Mt/a新井设计。设计共有5层设计可采煤层，分别是36B#、36A#、25#、8#和4#煤层 。平均总厚度为7.24 m，煤的工业品牌号为1/3焦煤。设计井田的可采储量为90.88Mt，服务年限为72a,划分三个水平开采。 本设计矿井采用双立井开拓，分组集中大巷。一水平共划分6个采区，一个工作面达产。采区采用大巷装车式下部车场，主运输为3t底卸式矿车，辅助运输为1.5t固定式矿车轨距600mm采用，机械化采煤，采用“四、六”式工作制提升设备为主井采用对t箕斗提升，副井采用罐笼。 Abstract This is a new project for the Colliery of Cheng Shan which the mine production capacity is 0.9Mt/a. There are five coal seams designed to be exploited. They are 36B#、36A#、25#、8# and 4# coal seams and the average thickness is 7.4m. The industry band of the coal is 1/3 coking coal and the workable reserves designed for the colliery is 90.88Mt/a so that it is expected to run for 72 years. The coalfield is divided into three mining level. The project will use the main and auxiliary shaft for development and use the gathering main roadway for each coal seam group and mining district crosscut for development roadway layout. The first mining level will divided into six mining districts and only one working face can satisfy the production.Mining area roadway charging the lower yard, main transportation for 3t-dump for the end of mine car, and the assisted transport for 1.5t-fixed mine cars; The roadway use the gauge of 600mm.The partition type is for ventilation. General mechanical coal mining and four and six worksystem will be used , lifting equipment using two pairs of 12t skip lifting, auxiliary shaft with a pair of 1.5t double-deck bicycle general cage. Key words: Mining Level Workable Reserves Development Roadway Layout 目 录 摘 要 Ⅰ Abstract Ⅱ 第1章 井田概况及地质特征 1 1.1 井田概况 1 1.1.1井田位置及范围 1 1.1.2 交通位置 1 1.1.3 地形地势 2 1.1.4气候 2 1.1.5河流 3 1.1.6工农业概括 3 1.2 地质特征 3 1.2.1矿区范围内的地层情况 3 1.2.2井田范围内和附近的主要地质构造 5 1.2.3 煤层赋存状况及可采煤层特征 7 1.2.4 岩石性质、厚度特征 8 1.2.5 井田内水文地质情况 9 1.2.6 沼气、煤尘及煤的自然性 12 1.2.7 煤质、牌号及用途 12 1.3 勘探程度及可靠性 13 第2章 井田境界、储量、服务年限 15 2.1 井田境界 15 2.1.1 井田周边状况 15 2.1.2 井田境界确定的依据 15 2.1.3 井田未来发展情况 15 2.2 井田储量 16 2.2.1 井田储量的计算 16 2.2.2 保安煤柱 17 2.2.3储量计算方法 20 2.2.4储量计算的评价 20 2.3矿井工作制度、生产能力和服务年限 22 2.3.1矿井工作制度 22 2.3