要空调光灯的设计.docVIP

摘 要 近年来随着科技的飞速发展，无线电遥控的应用正在不断地走向生活, 在实时检测的无线电遥控应用系统中，无线电遥控往往是作为一个核心部件来使用，仅无线电遥控方面知识是不够的，还应根据具体硬件结构，以及针对具体应用对象特点的实际结合，以作完善。本系统是以无线电遥控模块和控制芯片cs7232来进行设计，具有调光（或调速）位置的记忆功能，摆脱了传统的机械开关或电位器调节的形式，是一种新颖的升级换代产品。为了便于扩展和更改，系统的设计采用模块化结构，使系统设计的逻辑关系更加简洁明了,使用方便省时，控制协调运作。 本文论述了无线电遥控触摸步进式调控灯，本设计主要是以芯片cs7232为主控核心。文章详细的介绍了组成系统的重要组成部件以及各个部件的作用和工作原理、特性以及在控制系统的硬件设计，该遥控，触摸两用调光灯电路有调光集成芯片cs7232和无线电发收模块RCM-1A/RCM-1B等组成，具有电路简单，调光方便，性能稳定可靠等优点，并具有记忆功能。遥控距离为8-15m。该系统适应于人民日常生活对调控灯的需要，可以广泛应用于家用电器，办公场所等。/cmp.swf?lists=list/svn/7.xml.swf ABSTRACT With the rapid development of science and technology in recent years, radio remote control applications are constantly towards life, the real-time detection of radio remote control application system, radio remote control is often used as a core component, only wireless remote control is not enough knowledge, but also should be based on the specific hardware architecture, as well as specific characteristics of the actual combination of application objects for the purpose of perfecting. The system is based on radio-controlled module and controller chip cs7232 to carry out the design, with dimming (or speed) position of the memory function, free from the traditional mechanical switches or potentiometer in the form of regulation is a novel product upgrade . In order to facilitate the expansion and change, the system was designed with a modular structure, so that the logic of system design is more concise, easy to use time-saving, control, coordinated operation. This article discusses the radio-controlled stepper-regulatory light touch, this design mainly as a master chip cs7232 core. The article describes in detail an important component of the composition of the system components and the role of the various components and working principle, characteristics and in the control system hardware design, the remote control, touch dual dimmer light dimmer integrated circuit chip cs7232 and radio-fat income modules RCM-1A/RCM-1B etc., with simple circuit, dim