机械加工专业毕业的设计外文翻译.docxVIP

附 录ToolPurpose Upon completion of this unit, students will be able to: * Rough and explain the difference between finishing. * Choose the appropriate tool for roughing or finishing of special materials and processing. * Recognition Tool Cutting part of the standard elements and perspective. * The right to protect the cutter blade. * List of three most widely used tool material. * Description of each of the most widely used knives made of the material and its processing of Applications. * Space and inclination to understand the definition. * Grinding different tools, plus the principle of space and inclination. * To identify different forms of space and the inclination to choose the application of each form. The main points of knowledge: Rough-finished alloy steel casting material Scattered surplus carbide ceramic materials (junction of the oxide) Tool With a chip breaking the surface roughness of the D-cutter knives diamonds After Kok flank behind the standard point of (former) angle off-chip Side front-side appearance and the outline of the former Kok (I. Kok) Grinding carbon tool steel front-fast finishing horn of rigid steel Double or multiple-side flank before the dip angle oblique angle Surface-radius Slice root for curling Rough and finishing tool Cutting speed only in the surface roughness not required when it is not important. Rough the most important thing is to remove the excess material scattered. Only in surface roughness of the finishing time is important. Unlike rough, finishing the slow processing speed. Chip off with the D-knives, better than the standard point of knives, in Figure 9-10 A, is designed for cutting depth and design, for example, a 5 / 16-inch box cutter blade of the maximum depth of cut 5 / 16 inches, and an 8 mm square block will be cutting knives Corner to 8 mm deep, this tool will be very fast Corner block removal of surplus metal. Slice merits of the deal with that, in a small blade was close thinning. This t