综合办公楼毕业的设计计算书.doc

摘 要 该建筑位于大连市。建筑物占地面积约1200㎡h=600600mm，框架梁采用C30混凝土,主梁截面bh=300700mm,次梁截面bh=200500mm,基础采用柱下独立基础,混凝土等级是C25. 沈阳医学院综合办公楼的设计依据为设计任务书和现行规范，总体设计分为八个部分：第一章 方案论述，第二章 荷载汇集及截面尺寸，第三章 重力荷载计算，第四章 水平地震荷载作用下框架结构的内力和位移计算，第五章 竖向荷载作用下框架结构的内力分析，第六章 横向框架内力组，第七章 框架结构配筋计,第八章 现浇板配筋计算,第9章 基础设计,第十章 楼梯设计。第一现浇板配筋计算章中，通过考虑各种因素选定了建筑方案，在其余的几章中，我们进行了结构计算并且对梁柱、楼板、楼梯和基础进行了配筋。 关键词: 框架结构, 地震作用, D值法, 柱下独立基础. Abstract This building is located in shenyang.This engineering covers the area of about 1200㎡. There are floors with a hight of 18m.The height difference between inside and outside is 0.45m. It is 57.6 meters length and 16.8 meters wide. The structural form of the civil engineering is the form of reinforcement concret casting. The strength class of the frame column is C30.The cross sections is 600600.The strength class of the frame beam is C30, and the cross sections are 300mm700mm and 200mm500mm.The foundation is the independent under column foundation with the concret of C25. The design of the office building is completed based on the task project, Specification of Civil Engineering and expertises that we have learnded. The whole design is divided into eight parts: Chapter One:Project presendatian Chapter Two: Load and section dimension ,Chapter three:Gravity Loading Representative Value Chapter Four:Horizontal shaken action analyses, Chapter Five:vertical load action down skeletal internal force analyses, Chapter Six:Internal Force Combination, Chapter seven: Frame Section Design And Reinforce, Chapter eight: Ban reinforce .Chapter nine: Design of foundation Chapter ten: Design of staircase. .At the first part,the building design competition is to be chosed. In the other parts, after the directions of the frames is determined, firstly the weight of each floor is calculated .Then the vibrate cycle is calculated by utilizing the peak-displacement method, then making the amount of the horizontal seismic force can be got by way of the bottom-shear force method. The seismic force can be assigned