双丝杠驱动进给实验台装配仿真_毕业设计.docVIP

摘 要 虚拟装配作为虚拟产品开发技术的一种单元技术，在虚拟制造、动态仿真中发挥着重要的作用。运用该技术不但有利于产品设计，而且还可以大大缩短产品开发周期，降低生产成本。本论文将该技术应用于双丝杠驱动进给实验台的设计与仿真研究中。 本论文首先介绍了虚拟装配技术的国内外的发展状况;然后,运用SolidWorks软件进行双丝杠驱动进给实验台中零件的设计和建模;其次,根据机械设计手册及公差配合相关知识，确定重要零部件的公差尺寸;接下来,运用SolidWorks软件对下实验台零件的装配顺序进行了研究, 提出实验台的装配方法;最后,对实验台的运行过程进行仿真,找出可能发生相互干涉的零部件。 基于Solidworks的双丝杠驱动进给实验台的虚拟装配研究，降低了实验台的设计和制造的成本，提高装配精度和质量，缩短产品开发的周期。 关键词:机械零件; solidworks; 零件建模; 虚拟装配; 装配顺序 ABSTRACT As a kind of unit technology of virtual product design technology，virtual assembly is playing an important role in virtual manufacturing and dynamic simulation．Using this technology is not only conducive to product design，but also can greatly shorten the product’s period, reduce the product’s design costs.In this thesis, the technology for dual-feed screw driving test bed design and simulation study. This paper introduces the virtual assembly technology development at home and abroad; Then, the use of SolidWorks software for dual-feed screw driving part of the design of experiments and modeling in Taichung; Secondly, according to the Design Manual and mechanical tolerances with the knowledge to determine the size of important parts of the tolerance； Next, the use of SolidWorks software test-bed for the next part of the assembly sequence for the study and submit a test bed assembly method; Finally, the test bed to simulate the operation of the process to identify possible interference between the zero Components. Two screw drive on Solidworks feed assembly of the virtual test bed, reducing the test-bed design and manufacturing costs, improve the assembly precision and quality, shorten product development cycles. Keywords: Mechanical; Solidworks; Parts Modeling; Virtual assembly; Assembly sequence 目 录 1. 绪论 1 1.1 论文研究背景、目的与意义 1 1.2 虚拟装配 2 1.2.1 国外研究概况 2 1.2.2 国内研究概况 3 1.2.3 虚拟装配技术研究的发展趋势 4 1.3 论文的研究内容 5 2. 零件建模 6 2.1 工作台的建模 6 2.1.1 创建工作台主体 6 2.1.2 实体钻孔 7 2.1.3 拉伸切除 8 2.2 底座的建模 10 2.2.1 创建底座主体 10 2.2.2 完成侧边创建 13 2.2.3 创建底座上的各种孔 14 2.3 左轴承支座的建模 20 2.3.1 创建左轴承支座主体