外文翻译轴流管壳式换热器壳侧流体进 出口分布挡板理论研究.docxVIP

外文翻译 THEORETICAL INVESTIGATION OF FLUID DISTRIBUTOR IN THE INLET/ OUTLET REGION OF SHELL-SIDE OF SHELL-AND-TUBE HEAT EXCHANGER WITHLONGITUDINAL FLOW ZEN G Wen-Liang1，2, HU Xian-ping1, DEN G Xian-h1 (1. The Key Lab. of Enhanced Heat Transfer Energy Conservation of the Ministry of Education , South China University of Technology , Guangzhou 510640 ,China ; 2. The Chemistry and Materials Department ,Hengyang Normal University , Hengyang 　421001 ,China) Abstract:Presents the theoretical investigation of fluid distributor in the region of inlet/ outlet of shell-side of shell-and-tube heat exchanger with longitudinal flow in this paper . It is advanced the structural optimal mathematical model among the various structural parameters of shell-side of heat exchanger. The model provides reference and direction not only for experimental and numerical investigation of this problem, but also for the other process with fluid distribution. Key words: shell-and-tube heat exchanger; longitudinal flow ; fluid distribution ; structural optimization ; theoretical model CLC Number : TQ051. 5 　　　　Document Code :A 0 　Introduction Because of such advantages as lower pressure drop of shell-side , larger logarithmic mean temperature difference (LMTD) , eliminating vibration of heat-transfer tubes , and better overall heat transfer performance , shell-and-tube heat exchangers with axial flow have become more popular in various are as of industrial process comparing with shell-and-tube heat exchangers with segment baffles. With the scale of industrial production devices become lager and larger , heat exchanger as a type of universal equipment in industrial process also need to satisfy the requirement of industrial process , and the heat transfer capability of heat exchanger became larger and larger . Because the length of tube of shell-and-tube heat exchanger is decided by processing technology condition, it is necessary to enlarge the diameter of shell-side in order to enlarge the heat tra