深部矿井开采冲击地压预防与治理.doc

设计题目：临沂矿务局古城矿1.8Mt/a新井设计 专 题：深部矿井开采冲击地压的预防与治理 摘要本设计包括三个部分：一般部分、专题部分和翻译部分。 一般部分为矿t/a新井设计。煤矿位于交通便利，井田总面积为2。主采煤层为号煤，平均倾角为，煤层平均总厚为m，井田地质条件简单井田工业储量为t，矿井可采储量t。矿井服务年限为a，最大涌水量为m3/h。矿井瓦斯涌出量较为瓦斯矿井。 井田为开拓。大巷采用胶带运输机运煤，辅助运输采用矿井通风方式为通风。 矿井年工作日为30d，工作制度为“”制。一般部分共包括10章：1.矿区概述及井田地质特征2.井田境界和储量3.矿井工作制度及设计生产能力、服务年限4.井田开拓5.准备方式-区巷道布置6.采煤方法7.井下运输8.矿井提升9.矿井通风与安全技术10.矿井技术经济指标。专题题目翻译部分主要内容ABSTRACT This design includes of three parts: the general part, special subject part and translated part. Mine the general part of the ancient city of 1.8 Mt / a new well design. Mine is located in Jining city in Shandong, transport facilitation. East-west Waida 6.5km, north-south width 2 ~ 5km, total area of the mine 16.62km2. For the main coal seam of coal on the 3rd, the average angle of 9 °, the average total seam thickness is 8.75 m, Waida simple geological conditions. Mine industrial reserves of 194.71 Mt, mine recoverable reserves 139.51Mt. Shaft length of service for 59.61 a, the largest water yield for the 430 m3 / h. Lower gas emission in coal mine for the low-gas coal mine. For single-level mine shaft to open up. Roadway used coal belt conveyor, auxiliary transport wuji rope used for transport, for the central ventilation shaft ventilation tied. Mine was working for the 330d, system as a 38 structure. The general part of a total of 10 chapters: 1. Mine and mine geological features outlined; 2. Waida realm and reserves; 3. Mine system and design capacity, length of service; 4. Waida development; 5. To prepare the way - with the district roadway layout ; 6. mining methods; 7. underground transport; 8. mine hoist; 9. mine ventilation and security technologies; 10. mine the basic technical and economic indicators. Thematic topics for the deep mining of rock burst prevention and treatment. 一 般 部 分 一般部分 1 1 矿区概述及井田地质特征 1 1.1矿区概述 1 1.1.1矿井地理位置、地形特点和交通条件概述 1 1.1.2 矿区的气候条件 2 1.1.3 矿区的水文情况 2 1.2 井田地质特征 2 1.2.1 地形地貌、地质构造 2 1.2.2 地质构造 3 1.2.3 矿区的水文地质情况 6 1.2.4岩层地温特性 7 1.