通信专业外文翻译--基带信号解调和检测.docVIP

Baseband Demodulation/Detection In the case of baseband signaling, the received waveforms are already in a pulse-like form. One might ask , why then ,is a demodulator needed to recover the pulse waveforms? The answer is that the arriving baseband pulses are not in the form of ideal pulse shapes, each one occupying its own symbol interval. The filtering to suffer from inter-symbol interference (ISI) and thus appear as an amorphous “smeared” signal, not quite ready for sampling and detection .The goal of the demodulator (receiving filter) is to receiver a baseband pulse with the best possible si