齿轮凸轮合件设计.docxVIP

摘要塑料工业作为当今时代发展最快的工业方向，其中发展较快的是注塑类模具。所以通过研究注塑成型将对了解塑料制品的生产和提高产品的质量有重要的意义。通过对齿轮凸轮组合件注塑模具的解析，(详询QQ：946538029)想出应在动模上利用滑块对上半部分的凸轮抽芯、利用分型面对下半部分凸轮进行脱模，从而解决了凸轮脱模问题。本文对所设计模具的滑块设计、型芯型腔设计、动定模定位设计进行了简要阐述，介绍了模具设计和制造过程中的问题。经过实践及模流分析判断，本模具设计合理，达到批量生产条件，成型的塑件达到质量要求。本设计阐述了注塑成型的基本原理，突出了分型面的选择与抽芯机构的结构设计。同时具体的介绍了注塑模具的工艺设计，主要零部件、浇注系统、推出杆件、温度控制和排气系统的设计方式，并对模具涉及参数的选取做了相应说明。本设计通过使用CAD和三维软件UG及Plastics Insight软件模块，对成型零部件及各标准件和标准模架进行了计算及绘制设计。(详询QQ：946538029)关键词：齿轮；凸轮；组合件；注塑模具；设计AbstractIndustrial plastics industry as the development of the contemporary era is the fastest, the rapid development of injection mold. So through the study of injection molding to understanding the production of plastic products and has important significance in improving the quality of the products.Through analyzing the gear cam composite mold, should come up with in the dynamic model using the slide block core pulling, the cam part of the lower half part of the parting face cam demoulding, which solves the demoulding problem of cam. In this paper, the design of slider design, mold core and cavity design, dynamic design of fixed die positioning were introduced briefly, introduces the process of mold design and manufacturing problems. Through practice and mold flow analysis, the mould design is reasonable, to achieve mass production conditions, to achieve the quality requirements of plastic molding.The design principle of the injection molding, the structure design of the choice of parting and core pulling mechanism. At the same time, describes in detail the process of injection mold design, main components, gating system design, launch bar, temperature control and exhaust system, and relates to the selection of parameters to die to do the corresponding notes. This design by using CAD and UG software and Plastics Insight software module, the forming parts and standard parts and standard mold were calculated and drawing design. (详询QQ：946538029)Key words: Gear; Cam; Assembly; Injection mold; Design目录引言11 成型塑件工艺性分析21.