BS -- 按认可焊接工艺操作的焊工鉴定考试规范.第部分金属管与管板接头间电弧焊.docVIP

BS 4871-3-1985 按认可焊接工艺操作的焊工鉴定考试规范.第3部分金属管与管板接头间电弧焊 BRITISH STANDARD BS 4871-3: 1985 Specification for Approval testing of welders working to approved welding procedures — Part 3: Arc welding of tube to tube-plate joints in metallic materials UDC 621.791.007.2:331.108.376: [669-462:621.791.75] .yang64#ff66ff BS 4871-3:1985 This British Standard, having been prepared under the direction of the Welding Standards Committee, was published under the authority of the Board of BSI and comes into effect on 29 March 1985 ?? BSI 12-1998 The following BSI references relate to the work on this standard: Committee reference WEE/36 Draft for comment 83/79157 DC ISBN 0 580 14366 X Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Welding Standards Committee (WEE/-) to Technical Committee WEE/36, upon which the following bodies were represented: Aluminium Federation Associated Offices Technical Committee Association of Consulting Scientists British Constructional Steelwork Association British Gas Corporation British Railways Board Electricity Supply Industry in England and Wales Engineering Equipment and Materials Users’ Association Heating and Ventilating Contractors’ Association Ministry of Defence National Coal Board Power Generation Association (BEAMA Ltd.) Process Plant Association Society of Motor Manufacturers and Traders Limited Stainless Steel Fabricators’ Association of Great Britain United Kingdom Atomic Energy Authority Water-tube Boilermakers’ Association Welding Institute Welding Manufacturers’ Association (BEAMA Ltd.) Coopted member Amendments issued since publication Amd. No. Date of issue Comments .yang6#ff66ff BS 4871-3:1985 ?? BSI 12-1998 i Contents Page Committees responsible Inside front cover Foreword ii 1 Scope 1 2 Definitions 1 3 Information to be given to the welder 1 4 Items to be recorded 1 5 Changes not affecting approval (other than mechanized or automatic welding) 1 6 Exten