Controller with adjustable factorbased on S-300 PLC英语论文.docVIP

A Fuzzy-PID Controller with adjustable factor based on S7-300 PLC Liu Xingqiao* School of Electrical and Information Engineering, Jiangsu University, ZhenJiang ,Jiangsu, 212013,China Email: xqliu@ *Corresponding author Geng Jiao School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, Jiangsu, 212013, China Email: jiaogeng2006@163.com Teng Shaoqing School of Electrical and Information Engineering, Jiangsu University, ZhenJiang ,Jiangsu, 212013,China Email:tengshaoqing@126.com Li Chengchun School of Electrical and Information Engineering, Jiangsu University, ZhenJiang ,Jiangsu, 212013,China Email: lichengchun1980@163.com Abstract: A Fuzzy-PID controller with adjustable factor is designed in this paper. Scale factor’s self-adjust will come true. Fuzzy control algorithm is finished in STEP7 software, and then downloaded in S7-300 PLC. WinCC software will be used to control the change-trend in real time. Data communication between S7-300 PLC and WinCC is achieved by MPI. The research shows that this Fuzzy-PID controller has better robust capability and stability. It’s an effective method in controlling complex long time-varying delay systems. Keywords: fuzzy-PID, adjustable factor, temperature control, MPI. 1 INTRODUCTION Temperature control is very important in industrial production. The most common temperature control objects in modern industry are boiler, electric furnace, the control system of steam plant and distillation column (F. G. Hinskey, 2004). Temperature control system generally has the characteristic of large inertia and delay, so it’s difficult to establish mathematical model exactly. In industrial production process, some control methods have been employed, such as PID control (Bolat, E.D., Erkan, K., Postalcioglu, S., 2005), Smith predictive control (He, S.- Z.,Xu, F.-L., Tan, S., 1992), Model predictive control, Fuzzy control (Chia-Feng Juang, Jung-Shing Chen, Hao- Jung Huang , 2004), Robust control (Ingram,