基于WINCC组态软件对复杂工程的设计的的研究与实现.docVIP

XXX毕业设计 诚信承诺书 本人郑重承诺：我所呈交的毕业设计《基于WINCC组态软件对复杂工程设计的研究与实现基于WINCC组态软件对复杂工程设计的研究与实现随着工业自动化水平的迅速提高，人们对工业自动化的要求越来越高，通用工业自动化组态软件的出现实现完美的过程可视化，用于实现提高整个造纸系统的生产效率、运行可靠性甚至环保。Based on WINCC configuration software to complex engineering designs research and realization Abstract Along with industrial automation level rapid enhancement, the people were getting higher and higher to industrial automations request, integrated the man-machine contact surface (HMI) the system and the monitoring management (SCADA) systems general industrial automation configuration softwares appearance, has realized the perfect process visualization, provided the complete operation and the surveillance function for each industrial field. This article mainly said that （1）uses Siemenss WinCC 6.2 configuration software design manufacture friendly man-machine contact surface, and/operates kneading board + one, two cording diagrams with the touchscreen/text monitor to constitute the tertiary monitoring new pattern together, realizes the use superior machine and tracks the record as well as to equipments common control in the papermaking process to each technical process systems real-time monitoring;（2） And the use industry ethernet switchboard and the ordinary ether network card connect PLC and industry PC machine through the TCP/IP way small scale, enables the entire worn out papermaking production system to be possible systematically the networking. Solves between each Production department not to be able prompt, quick, the convenience relation question, the change “to play singles the aspect which since long fights alone, uses in realizing raises the entire papermaking systems production efficiency, the movement reliability, convenience production management, the reduced nonessential manpower waste even environmental protection. Key words：Networking Triple Monitor HMI WinCC 目 录 摘 要 I Abstract II 1引言 1 1.1项目研究的背景 1 1.2项目研究的内容 3 2工艺流程 3 2.1制浆 3 2.2调制 4 2.3抄造 5 2.4污水处理 6 3系统组成及其联网 8 3.1系统硬件组成 8 3.1.1