机械 毕业设计 论文 课程设计摘要 新KS型单级单吸离心泵的设计.docVIP

机械 毕业设计 论文 课程设计 2008-10-26?|?新KS型单级单吸离心泵的设计 摘 要 KS型单级单吸离心泵吸收了KT、SB、ES、IS、XA及国外优秀离心泵系列产品的优点，采用了多项水力设计及工艺方法的发明专利和实用新型专利而研制开发的高新技术系列产品。它广泛用于空调、制冷、冰蓄冷、自来水厂、消防、环保、高层供水和城乡排水等领域，一般输送85摄氏度以下清水或物理化学性质类似清水的液体。通过变换泵的结构及材质可输送高温及腐蚀性介质，可用与化工、冶金等行业。本系列产品产品具有高效率、高性能、高耐压、高可靠性和安装维修方便等特点，其结构参数符合国际标准产品相互替代，承压能力为1.6MPa级，诸项技术经济指标达到国外同类产品先进水平，属于国际接轨的换代产品。 注：单级单吸离心泵为一个叶轮一个进水口的离心泵。 关键词：单级单吸、叶轮、机械密封、安装、故障分析。 Abstract KS-absorption-type single-stage centrifugal pump absorption of KT, SB, ES, IS, XA and abroad outstanding merits of the centrifugal pump series with a number of hydraulic design and technology of the invention patent, and a patent application of a new and high-tech research and development technology products. It is widely used in air conditioning, refrigeration, ice storage, the water plant, fire protection, environmental protection, urban and rural water supply and drainage senior in areas such as transport 85 degrees Celsius below normal water or similar physical and chemical properties of liquid water. Transform pump through the structure and materials can be corrosive and high temperature transmission medium can be used with the chemical, and metallurgical industries. Products in this series of high efficiency, high performance, high pressure, high reliability, and easy installation and maintenance characteristics of the structural parameters in line with international standard products as an alternative, the pressure of 1.6 MPa-capacity, all of the technical and economic indicators have reached abroad Similar Products advanced level of international standards generations. Note: single-stage centrifugal pump for a single suction inlet of an impeller centrifugal pump. Key words: single-stage-to smoke, impeller, mechanical seals, installation, fault analysis. 摘要----------------------------------------------------------------------Ⅱ Abstract------------------------------------------------------------------Ⅲ 新KS型单级单吸离心泵的设计-------------------------------------