烧结生过程中的烟气脱硫.docVIP

论文题目：烧结生产过程中的烟气脱硫 目　　录 摘 要 1 ABSTRACT 2 引 言 3 1 烧结过程中二氧化硫的生成机理 4 1.1 烧结烟气的特点 4 1.2 烧结过程中二氧化硫的产生及其再吸收 4 1.2.1 二氧化硫的产生 4 1.2.2 二氧化硫的再吸收 5 1.3烧结过程中二氧化硫浓度分布特征 5 2 烧结过程中二氧化硫的控制 6 2.1 控制方法 6 2.2 烟气脱硫技术 7 2.2.1 钙法 7 2.2.2碳法 8 2.2.3 氨法 8 3 国内外烧结烟气脱硫技术的现状 11 3.1 国内现状 11 3.2 国外现状 11 结 论 13 致 谢 14 参考文献 15 摘 要 随着我经济日益腾飞，环境问题越来越受到重视，而钢铁企业二氧化硫的排放总量仅赐予燃煤电厂。本文结合钢铁行业烧结烟气的特点，评述了目前几种烧结烟气脱硫技术，指出钢铁企业烧结烟气脱硫要结合烧结烟气的特点和钢铁企业的实际情况，按照循环经济的模式，实现资源、回收 关键词: 环境；烧结烟气；技术措施；装置设备 ABSTRACT I take off with the economy, more and more attention to environmental issues, and iron and steel enterprises dioxide emissions of coal-fired power plant is only given. In this paper, iron and steel industry sintering flue gas characteristics, review the current number of sintering flue gas desulfurization technology, pointed out that the iron and steel enterprises should sintering flue gas desulfurization characteristics of sintering flue gas and the actual situation of iron and steel enterprises, according to the mode of circular economy, resource recovery. As of now, due to the high cost of sulfur dioxide pollution control, there is no reliable national special technical measures of the sintering machine iron and steel enterprises do not have any specific desulfurization device settings. Therefore, Sintering machine in the current national average size of a substantial increase in cases has increased the level of sintering flue gas desulfurization equipment, special technical research and development, as soon as possible to resolve the issue desulfuration sintering machine, iron and steel enterprises have become a circular economy and sustainable development topics Keywords: Environment; sintering flue gas; technical measures; device equipment 引 言 铁矿粉烧结是将含或细粒料进行高温加热，在不完全熔化的条件下烧结成块的过程。它是许多物理化学变化的综合过程，这个过程错综复杂，在积分中设置更段的时间内，烧结料就因强烈的热交换从70℃以下被加热到1200-1400℃，与此同时，它还要从固相中产生液相又被迅速冷却而凝固硫化物的氧化和去除是烧结生产中必须考虑的一个重要的环节。硫化物中的硫是以硫（如SO2、SO3、）释放到烟气中的，烟气则是通过风箱和风箱支管在主烟道汇集，经电除尘器的气态氧化物形式后由烟囱高空排放。长期以来，二氧化硫的直接排放加剧了酸雨形成，对环境造