南煤集南庄矿15#煤八采区初步设计.doc

完整设计图纸请联系本人，参见豆丁备注。 毕业设计说明书 题目：南煤集团南庄矿15#煤八采区初步设计 毕业生姓名 ： 专业 ： 煤矿开采技术 学号 ： 指导教师 ： 所属系（部） ： 采矿工程系 摘 要 本设计是对南煤集团南庄矿15#八采区设计，其中主要内容有：采区上山布置方案的确定、采区巷道的布置以及采区通风风量计算和安全措施。本次设计为15#煤8采区。设计采用走向长壁采煤方法开采。回采工艺采用后退式、综合机械化放顶煤采煤法。作业制度为“四六制”，三班采煤、一班检修。工作面的设备有双端可调双滚筒采煤机、液压支架、可弯曲刮板运输机、破碎机、转载机等。采空区采用全部跨落法管理顶板。同时，由于该矿井是煤与瓦斯突出矿井，在采区巷道布置过程中，专门布置了一条瓦斯高抽巷，这样在保证采区工作面安全生产的情况下，还可以给矿井带来一定的经济效益。根据本采区的具体条件，采用单水平布置，且采区布置了三条主要巷道，即胶带大巷、轨道大巷、回风大巷，服务于该采区各工作面。采区采用机械抽出式通风方法，混合式通风方式，其通风方式为“一进两回”，即“U+L”的通风方式。最后，该设计还编写了各种灾害预防措施及灾害发生后的避灾路线。此设计符合相关的法律法规，达到国家要求安全生产的各项标准。 关键词：走向长壁采煤方法开采 单水平 抽出式通风方法 设计人：姚若尧 Abstract This design is founded ore in south coal group # 8 of 15 mining area design, the main contents are: the mountain mining area layout, mining roadway layout and mining ventilation air volume calculation and safety measures. The design of 15 # coal mining area. Design USES to longwall mining method. Recovery process adopted backward type and comprehensive mechanized caving mining method. Operating system as the \allocation\, class 3 coal mining, class maintenance. Adjustable working face equipment has a double side double drum shearer, hydraulic support, flexible scraper conveyor, crusher, reprint machine, etc. Gob roof management across all fall method. At the same time, due to the coal and gas outburst in the mine is mine, in the process of mining roadway layout, specially set up a high gas drainage way, so that ensure the safety of mining coal face in production, also can bring certain economic benefits to the mine. According to the specific conditions of the mining area, with one horizontal layout, arrangement of the three main roadway and mining area, namely the tape alleys, rail alleys, return air alleys, services to the mining working face. Mining machinery drawer-type ventilation methods, hybrid ventilation mode, the ventilation mode is \one into two\, namely \U + L\ way of ventilation. Finally, the design also wrote all kinds of disaster prev