中国标准与欧洲标准关于钢管桁架结构节点设计简单对比.docVIP

中国标准与欧洲标准关于钢管桁架结构节点设计简单对比 　　摘要：本工程为毛里塔尼亚5万吨级油码头改造工程，该码头在1977年至1979年期间由ETPO公司兴建，并在1979年投入使用，该码头主体为圆钢管桁架结构，上部面层为木结构。由于经过30多年的使用，该码头已破损严重，本次改造工程按原码头结构型式进行恢复设计，采用中国标准与欧洲标准分别进行复核计算，并已取得监理公司瑞士公证通用行（SGS）的认可，现仅就中国标准和欧洲标准关于圆钢管桁架结构节点设计进行简单的总结。 　　关键词：油码头；改造工程；圆钢管；桁架结构；节点设计 　　Pick to: this project is Mauritania 5 ton oil wharf project, the port during 1977 to 1979 by ETPO company building, and put into use in 1979, the terminal main body for the round steel tube truss structure, the upper surface of wood. Due after more than 30 years of use, the wharf has been seriously damaged, the renovation project according to recover the original pier structure is designed, by Chinese standards and European standard review calculated respectively, and has set up a supervision company Swiss notarized general row (SGS), now in China and the European standard on round steel tube truss structure node design for simple summary. 　　Key words: oil terminals; Renovation project; Round steel tube; Truss structure; Node design 　　中图分类号：TU2文献标识码：A文章编号：2095-2104(2013) 　　 　　Chinese standards and European standards of steel pipe truss structure node design comparison 　　Wu Guo-song 　　（Tianjin Coastal Zone Engineering Co.,Ltd,Tianjin,300384） 　　Abstract: This works is the 50000 DWT oil terminal renovation project in Mauritania, the terminal in the 1977 to 1979 period by ETPO company to construct, and put into use in 1979, the terminal main body is a circular steel tube truss structure, the upper surface layer of wood structure. Because after 30 years of use, the wharf has been damaged seriously, the renovation project according to the original wharf structural type of restoration design, by Chinese standards and European standards were checking calculation, and have obtained the supervision company SOCIETE GENERALE DE SURVEILLANCE S.A.(SGS ) approved, the Chinese and European standards on the circular steel tube truss structure node design only for simple summary. 　　Keywords: Oil wharf; Renovatio