端盖薄壳件的模具计算机辅助设计毕业论文).docx

工学学士学位论文端盖薄壳件的模具计算机辅助设计Mold CAD of Plastic Cover Shell吴琼佳木斯大学2015年6月国内图书分类号：工学学士学位论文端盖薄壳件的模具计算机辅助设计本 科 生：吴琼导师：颜兵兵申请学位级别：工学学士工程领域：机械工程所在单位：机械工程学院答辩日期：2015年6月授予学位单位：佳木斯大学摘要随着科学技术的不断发展以及计算机技术的不断成熟，使用CAD技术进行模具设计研究已经成为注塑模具发展的必然要求。使用CAD技术可以有效地提高注塑模具的设计水平、提高模具的制造质量、缩短研发周期、降低生产成本、减少设计人员的劳动强度等，CAD技术在注塑模具行业应用必将受到越来越多的重视。该设计介绍了国内外注塑模具的研究现状和未来发展趋势，阐述和分析了注塑模具CAD技术应用情况。以端盖薄壳件注塑模具为实例，对注塑模具CAD技术进行了详细的研究，主要研究内容：（1）结合薄壳件的结构特点进行选材，确定浇注材料。（2）通过相关书籍文献进行理论计算，完成对塑件型腔型芯、斜导柱分型抽芯、斜顶、浇注系统与冷却系统等机构的计算后并简单校核并初步选择模架。（3）使用Creo软件的模具设计模块对实例进行模具结构设计，设计内容具体包括：模具型芯型腔设计、浇注系统与冷却系统设计、EMX标准模架的调用以及注塑模具辅助零件设计等。关键字：注塑模具；CAD；Creo；EMXAbstractWith the continuous development of science and technology and computer technology matures, for mold design using CAD technology research has become the inevitable requirements of injection mold. Using CAD technology can effectively improve the level of injection mold design, improve the manufacturing quality of mould, shorten the development cycle, reduce the production cost, reduce the labor intensity of designer, CAD technology applied in injection mould industry will be more and more attention.This design introduces the domestic and foreign research present situation and future development trend of injection mold, expounds and analyzes the injection mold CAD technology application situation. To end cover shell injection mould as an example, the injection mold CAD technology has carried on the detailed research, the research content mainly has the following three aspects:(1) With the structure characteristics of a thin shell parts for material selection, determine the pouring material.(2) Through the books on literature theory calculation, complete the mould cores and inclined guide pillar parting core-pulling, inclined top, gating system and cooling system of institutions such as computation and simple after checking and preliminary choose die set.(3) Using Creo software of mold design, the die structure design module for instance design content including: mold core