数字钟的设_毕业设计.doc

数字钟的设计摘要：随着电子工业的发展，电子产品日新月异。钟表的数字化给人们生产生活带来了极大的方便，而且大大地扩展了钟表原先的功能。诸如数字钟、万年历、电子表、定时自动报警、定时启闭电路、通断动力设备，甚至各种定时电气的自动启用、通信、网络等众多领域，所有这些都是以钟表数字化为基础的。由于其功能的不断增加，使用方便性不断提高，很多产品已经成为人类日常生活中不可或缺的助手。本文是基于单片机控制的数字钟系统的设计。该系统主要以单片机芯片AT89C51为核心结合按键选择模块来控制数码管显示模块和蜂鸣器模块工作，从而实现时钟和闹钟功能，并可对时钟及闹钟的时、分、秒进行单独校对，使其校正到标准时间。此设计以软件控制硬件及软硬件结合为指导思想，充分发挥单片机功能。同时，该数字钟系统还具有功耗小、成本低的特点，具有很强的实用性。由于系统实现的功能简单，因此具有一定的可扩展性。关键词：AT89C51单片机；数码管显示； The design of digital clock AbstractWith the development of the electronics industry, electronic products are different from before day by day. Watches digital has brought great convenience to peoples production and living, and greatly expanded the original watch function. Such as digital clock, calendar, electronic watches, timed automatic alarm, timed to open and close circuits, open and close the power equipment, even a variety of timed electrical auto-enabled, communications, networking and many other fields, all of which are based on watches digital. Increasing its functionality, ease of use continue to increase, many products have become an indispensable assistant to human daily life. This article is based on single chip microcomputer control of digital clock system design. This system mainly by the single-chip microcomputer AT89C51 as the core in combination with key choice module to control the digital tube display and buzzer module work, so as to realize the clock and alarm clock function, and can be on the clock and alarm clock, minutes and seconds to individually check, make the correction to standard time. This design in order to control the hardware and software and hardware combined with software as the guiding ideology, give full play to the MCU function. At the same time, the digital clock system also has the characteristics of low consumption, low cost, strong practicability. Due to the function of the system is simple, thus has certain extensibility. Key words: AT89C51 single chip microcomputer; Digit